WellVigil home Request a demo
Free engineering tool

Tubing and annulus volume calculator

Work out the internal volume of a tubing string and the volume of the annulus between it and the next string out. Choose standard sizes or type your own dimensions. Nothing you enter leaves your browser.

For reference only. This tool uses nominal body dimensions over a single length. It makes no allowance for couplings, upsets, packers, restrictions or washouts. Check every result by hand and against your own procedure before relying on it.

Tubing and annulus volume: calculation record

Inner string (tubing)

Outer string (casing)

Length

Standard sizes are nominal API 5CT body dimensions. Check them against your own tally and use the actual minimum inside diameter where it matters. For a well with several sections, calculate each section separately and add them.

Results —

Tubing internal volume—
Annular volume—
Tubing capacity per length—
Annular capacity per length—
Tubing wall thickness—mm

The annular volume is the space between the outside of the inner string and the inside of the outer string, over the length entered.

Calculated with the WellVigil tubing and annulus volume calculator, wellvigil.co.uk, on . For reference only.

Engineering reviewer: ______________________   Date: ____________

How it is calculated

tubing capacity per length  = π / 4 × ID²
annular capacity per length = π / 4 × (outer string ID² − inner string OD²)
volume = capacity per length × length

What it does not do

Need the test volume for a leak rate calculation? Take the result to the leak rate calculator.

Keeping this for every well? WellVigil stores each well's barrier schematic, strings, fluids, wellhead tests and annulus pressures in one place, and shows which wells need attention and why. Request a demo.