Hydrostatic pressure and fluid replacement calculator
Work out the pressure exerted by a column of liquid, and how that pressure changes when the fluid is swapped for a lighter or heavier one. Nothing you enter leaves your browser.
Hydrostatic pressure: calculation record
Inputs
Use true vertical depth, not measured depth. On a deviated well the two differ, and using measured depth overstates the pressure.
Results —
Hydrostatic head is a pressure difference, so it is the same in absolute and gauge terms. Pressure at depth is the surface pressure plus the head.
Fluid replacement: calculation record
Inputs
The interval is the true vertical height of fluid that is replaced. The tool assumes the whole interval is swapped and both columns are static.
Results —
A positive change means the replacement fluid exerts more pressure at the bottom of the interval than the original.
Calculated with the WellVigil hydrostatic pressure and fluid replacement calculator, wellvigil.co.uk, on . For reference only.
Engineering reviewer: ______________________ Date: ____________
How it is calculated
hydrostatic head (bar) = density (kg/m³) × true vertical depth (m) × gravity (m/s²) / 100,000 pressure at depth = surface pressure + hydrostatic head fluid gradient (bar/m) = density × gravity / 100,000 change in head = (replacement density − original density) × vertical interval × gravity / 100,000
A gauge surface pressure is converted to absolute by adding the atmospheric pressure entered. Density given as specific gravity is multiplied by 1,000 kg/m³.
What it does not do
- It does not correct density for temperature or pressure.
- It does not handle gas columns or several fluids stacked in one column.
- It does not convert measured depth to true vertical depth.
Keeping this for every well? WellVigil stores each well's barrier schematic, strings, fluids, wellhead tests and annulus pressures in one place, and shows which wells need attention and why. Request a demo.
